Wireless Solution R-512 Bedienungsanleitung PDF herunterladen (Seite 16)

4 BlackBox and WhiteBox F-1

16 W-DMX G4(S) User Manual, edition 2 2013-10

Name LED signal Description

RX mode:

• Off: Unit is not linked to any transmitter.

• On: Unit is linked to transmitter.

• Rapid Flashing: Transmitters are being searched or

linked transmitter is lost.

• Off: Unit is in G3 mode.

• On: Unit is in G4 or G4S 2.4 GHz mode.

G4/G4S is indicated by red SIGNAL LED on the unit.

• Flashing: Unit in G4S 5.8 GHz mode

SIGNAL

TX mode:

• Off: Unit is in G4S mode.

• On: Unit is in G4 mode.

RX mode: Part of signal strength

PWR

Power on / off

• On: Unit is in RX (receiver) mode.

• Flashing: Receiver is in repeater mode.

DATA

Data is available at the input / output.

RDM

WhiteBox: included, BlackBox: optional

• Off: No RDM data is available on output.

• On: RDM data is available on output (RDM Downstream

activated).

CTRL

• Off: Normal operation.

• On: Switch between normal operation (CTRL LED off)

and CTRL mode (flashing).

• Flashing: CTRL mode is active

To set the frequency band, see chapter "4.8 Switching

CTRL modes", page 23.

5.8GHz is not available in all countries. For more info please contact

Wireless Solution (see page 2).

4.4 Installing the unit

4.4.1 BlackBox F-1

1. Choose one of the following options to make the DMX connection:

– Connect the DMX source to the XLR 5 pin DMX IN port, XLR 3 pin DMX

IN port (BlackBox MK II only) or to the RJ 45 DMX IN port (BlackBox

MK I only).

– Connect the DMX fixture to the XLR 5 pin DMX OUT port, XLR 3 pin

OUT port (BlackBox MK II only) or the RJ 45 DMX OUT port (BlackBox

MK I only).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Wireless Solution R-512 Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger Wireless Solution R-512